Crane Electronics

Torque measurement and management solutions

Request a quote
View catalogues
Crane Electronics Logo: Tools for torque calibration

From Arsam We analyse your tightening applications and help you select the right combination of Torque wrenches, transducers, torque testers, data collectors and software Crane Electronics to control torque on your critical tools and joints.

Torque setting

Crane Electronics Solutions for Torque Management

The range of Crane Electronics covers the entire torque management cycle: from in-line measurement and tool auditing, to joint verification, calibration, and data analysis.

Crane Electronics digital torque wrench accessories Arsam

Digital and battery-powered torque wrenches

The Crane Electronics digital and battery-powered torque wrenches allow torque and angle to be measured with great precision directly at the workstation. Models such as the IQWrench3 offer Internal memory of results, programmable jobs and data transmission, ideal for production, quality, and online torque verification.

Request further information
Crane Electronics static rotary transducers

Rotary and static torque transducers

The Crane rotary and static torque transducers are used to accurately measure the torque of hand-held, electric, pneumatic or impact tools. The range includes rotary transducers for dynamic applications and Static and stationary transducers for test and calibration benches, with ranges from a few Nm to several thousand Nm.

Request further information
Crane Electronics testers for Arsam test banks

Torque testers and test benches

The Torque testers, joint simulators and test benches Crane Electronics allow the reproduction of soft or hard joins and Check the performance of wrenches and screwdrivers before they reach the line. Combined with transducers and software, they facilitate calibration, tool auditing and compliance with standards such as ISO 6789.

Request further information
Crane Electronics torque data collector Arsam line controller

Data collectors and line controllers

The Torque data collectors IQVu-2 and the TCI line controllers allow for the planning of measurements through jobs and rounds, storing results with date and time, automatically recognising transducers and keys, and Send the data to PC or plant systems for your analysis. They are the basis for real torque traceability in production.

Request further information
Crane Electronics Software Curatas Management by Arsam

Torque management software and complete solutions

The Crane management software complete the system allowing Configure jobs, analyse torque curves, generate reports, and consolidate data of wrenches, transducers, testers, and collectors. With these solutions, it is possible to close the loop: from measurement to continuous improvement and full traceability of tightening.

Request further information

Crane Electronics Catalogues

Browse and download Crane Electronics catalogues to discover its torque measurement and control solutions, tools, and specialised technologies for industrial applications.

Featured Catalogues

ReadStar TT – Torque Tester

ReadStar TT – Torque Tester

Tester with an integrated transducer for checking low-torque tightening tools. It allows readings to be recorded with date and time and exported to a computer, making production and workshop checks easier within the range of the selected model.

Torque Testers
View catalogue
TorqueStar – Torque Data Collectors

TorqueStar – Torque Data Collectors

Lite, Plus and Pro range of portable data collectors for measuring and analysing the torque of tightening tools. Offers different levels of test recording, analysis and management, with compatibility with Crane transducers and torque wrenches depending on the version.

Data Collection
View catalogue
IQWrench3 – Digital Torque Wrenches

IQWrench3 – Digital Torque Wrenches

Digital torque wrenches combining torque and angle measurement with data collection. They feature a display, visual alerts and vibration feedback, and support interchangeable heads for tightening control and traceable audits.

Torque Wrenches
View catalogue
CheckStar Multi – Torque and Angle Transducers

CheckStar Multi – Torque and Angle Transducers

Rotary transducers for checking tightening tools, with torque measurement, optional angle measurement and a visual result indicator. They connect to Crane data collectors and support wireless communication via the optional RFm module.

Torque Transducers
View catalogue

All Catalogues

TDC – Torque Calibrator for Caps
TDC – Torque Calibrator for Caps
Torque calibration system for marine and offshore applications. It combines a torque multiplier, a reference transducer, adapters and an indicator to check sensors installed in the drive system without the need for disassembly.
Torque Testers
View catalogue
TR150 – Portable Digital Indicator
TR150 – Portable Digital Indicator
Portable indicator for sensors and load cells, with peak, minimum and hold value functions. Battery operation and a protected housing make it suitable for measurements in the field, workshop and test stations.
Torque Accessories
View catalogue
TSR-200 – Portable Digital Indicator
TSR-200 – Portable Digital Indicator
Portable indicator for displaying measurements from sensors and load cells. It provides maximum and minimum value capture functions and calibration storage, with communication options for integration into measurement systems.
Torque Accessories
View catalogue
DSCC – Low-Profile Load Cells
DSCC – Low-Profile Load Cells
Pancake load cells for measuring tensile and compressive forces. Their low-profile design facilitates integration into material testing, fatigue testing and dynamic load applications, with configurations adaptable to different testing requirements.
Torque Accessories
View catalogue
Donut – Annular Load Cells
Donut – Annular Load Cells
Through-hole load cells for measuring force in confined spaces. Their compact stainless-steel construction offers a range of capacities and customisation options, including versions for marine and offshore applications.
Torque Accessories
View catalogue
TSSS – High-Capacity Static Torque Transducers
TSSS – High-Capacity Static Torque Transducers
Square-drive static torque transducers for high-torque applications, particularly in the marine and offshore sectors. Available with different capacities and protection options for subsea installations.
Torque Transducers
View catalogue
TSS – Square-Drive Static Torque Transducers
TSS – Square-Drive Static Torque Transducers
Reaction torque transducers with square-drive connections for measuring static torque or torque with limited rotation. They are used with torque wrenches and other square-drive equipment, with different capacities and options for industrial applications.
Torque Transducers
View catalogue
TSFF – Static Torque Transducers with Female Square Drive
TSFF – Static Torque Transducers with Female Square Drive
Static torque transducers with a mounting flange and female square drive for testing tightening tools. Their configuration facilitates installation on test benches or trolleys for verification and calibration applications, including high-torque testing.
Torque Transducers
View catalogue
TSSF – Static Torque Transducers with Male Square Drive
TSSF – Static Torque Transducers with Male Square Drive
Static torque transducers with a mounting flange and male square drive for testing tightening tools. Suitable for test stations and for verifying manual, hydraulic, pneumatic or electric tools, depending on the application.
Torque Transducers
View catalogue
TSF – Flange-to-Flange Static Torque Transducers
TSF – Flange-to-Flange Static Torque Transducers
Reaction torque transducers with flange-to-flange connections for measuring static torque or torque with limited rotation. Designed for integration into test assemblies and industrial applications requiring a mechanical flanged connection.
Torque Transducers
View catalogue
TRP – Rotary Torque Transducers with Slip Rings
TRP – Rotary Torque Transducers with Slip Rings
In-line rotary transducers with signal transmission via slip rings. They enable torque measurement in rotating systems and can be combined with speed measurement and display or signal-conditioning equipment.
Torque Transducers
View catalogue
TLT – Compact Rotary Torque Transducers
TLT – Compact Rotary Torque Transducers
In-line rotary transducers with non-contact measurement and integrated signal conditioning. They provide a compact solution for measuring low and medium torque in test equipment and engineering applications.
Torque Transducers
View catalogue
TLS – Non-Contact Rotary Torque Transducers
TLS – Non-Contact Rotary Torque Transducers
In-line rotary transducers with non-contact signal transmission and integrated bearings. Designed for torque measurement in research, development and process control applications, with different measurement ranges and mounting configurations.
Torque Transducers
View catalogue
RTA and RTD – Rotary Torque Transducers
RTA and RTD – Rotary Torque Transducers
Rotary transducers with single or dual measurement ranges for high-speed torque testing. They feature integrated signal conditioning and optional speed measurement to analyse the performance of motors, transmissions and rotating equipment.
Torque Transducers
View catalogue
TMFS – Flange-Mounted Rotary Torque Transducers
TMFS – Flange-Mounted Rotary Torque Transducers
Flange-mounted rotary transducers with non-contact signal transmission and no bearings between rotor and stator. Their compact design and integrated signal conditioning facilitate dynamic torque measurement in test and engineering systems.
Torque Transducers
View catalogue
Automatic Transducer Switching Box
Automatic Transducer Switching Box
Accessory for connecting up to five transducers to a Crane data collector and selecting the active channel without changing cables. It facilitates the use of multiple measurement ranges or test stations through automatic or manual switching.
Torque Accessories
View catalogue
WrenchLoader – Torque Wrench Loading Device
WrenchLoader – Torque Wrench Loading Device
Mechanical device for applying load in a controlled and repeatable manner when testing torque wrenches. It is used together with a transducer and a readout system to reduce variability caused by manual load application.
Torque Accessories
View catalogue
Joint Kits – Joint Simulation Kits
Joint Kits – Joint Simulation Kits
Kits for simulating hard and soft joints and testing tightening tools away from the actual workpiece. Depending on the version, they are combined with static or rotary transducers to reproduce test conditions and compare tool performance.
Joint Simulators
View catalogue
OMS Lite – Torque Analysis and Management Software
OMS Lite – Torque Analysis and Management Software
Software for managing torque measurements, jobs and audit rounds. It simplifies curve visualisation, results analysis and report generation, with export options for documenting quality control activities.
Data Collection
View catalogue
OMS – Torque Data Management Software
OMS – Torque Data Management Software
Software for centralising tools, joints and tightening results in a single database. It enables the organisation of audits and calibration tasks, curve analysis and report generation for quality monitoring and traceability.
Data Collection
View catalogue
Curatas – Tightening Control Software
Curatas – Tightening Control Software
Assembly guidance and control software that displays visual instructions to the operator and records tightening results. It works with WrenchStar torque wrenches and TCI controllers to verify sequences and document process traceability.
Line Controllers
View catalogue
WrenchMate – Torque Wrench Tester
WrenchMate – Torque Wrench Tester
Tester for checking and adjusting click-type or dial torque wrenches in workshop and production environments. Its bench- or wall-mounted installation and track and peak reading modes make routine checks of applied torque easier.
Torque Testers
View catalogue
WM10K – High-Torque Tool Tester
WM10K – High-Torque Tool Tester
Equipment for testing continuous-rotation torque tools and torque multipliers in high-torque applications. It features adjustable reaction supports and measurement and recording functions for testing and calibration tasks in workshops or maintenance environments.
Torque Testers
View catalogue
CapStar – Cap and Closure Torque Tester
CapStar – Cap and Closure Torque Tester
Digital tester for measuring the opening and closing torque of caps and containers. Its adjustable jaws accommodate different formats, with result recording for quality control in the food, beverage, pharmaceutical and cosmetics industries.
Torque Testers
View catalogue
ReadStar TT – Torque Tester
ReadStar TT – Torque Tester
Tester with an integrated transducer for checking low-torque tightening tools. It allows readings to be recorded with date and time and exported to a computer, making production and workshop checks easier within the range of the selected model.
Torque Testers
View catalogue
MAS – Mobile Tightening Audit Station
MAS – Mobile Tightening Audit Station
Mobile station for auditing the torque and angle of product joints on the assembly line. It organises and transports Crane torque wrenches and data collectors, with integrated power supply to facilitate verification rounds and quality control.
Test Benches
View catalogue
MTTS – Mobile Torque Test Bench
MTTS – Mobile Torque Test Bench
Configurable mobile station for testing tightening tools next to the production line. It can be equipped with transducers, joint simulators and data collectors to bring all test components together in a single workstation.
Test Benches
View catalogue
tJRS – Threaded Joint Simulator
tJRS – Threaded Joint Simulator
Threaded joint simulation system for testing tightening tools under repeatable conditions. It reproduces different joint stiffness levels and features automatic loosening to prepare the next test cycle.
Joint Simulators
View catalogue
TCI-2 – Assembly Line Controller
TCI-2 – Assembly Line Controller
Controller for integrating up to five WrenchStar Multi or Multi-e torque wrenches into the assembly line. It connects tightening results with production and traceability systems via industrial protocols, with configuration through a web interface.
Line Controllers
View catalogue
TCI Multi – Assembly Line Controller
TCI Multi – Assembly Line Controller
Line controller for connecting multiple WrenchStar Multi torque wrenches or transducers with an RFm module to the production system. It enables job configuration, receipt of tightening results and equipment status monitoring via a web interface.
Line Controllers
View catalogue
IQVu-2 – Torque and Angle Data Collector
IQVu-2 – Torque and Angle Data Collector
Touchscreen data collector for measuring torque and angle, displaying curves and organising tightening audits. It integrates results from Crane torque wrenches and transducers and facilitates their analysis, export and management for quality control.
Data Collection
View catalogue
TorqueStar – Torque Data Collectors
TorqueStar – Torque Data Collectors
Lite, Plus and Pro range of portable data collectors for measuring and analysing the torque of tightening tools. Offers different levels of test recording, analysis and management, with compatibility with Crane transducers and torque wrenches depending on the version.
Data Collection
View catalogue
Digital Torque Wrenches with FOD Design
Digital Torque Wrenches with FOD Design
Versions of the IQWrench3 and WrenchStar Multi digital torque wrenches designed to reduce the risk of loose parts and debris. Suitable for aerospace assembly and maintenance, as well as other processes with foreign object prevention requirements.
Torque Wrenches
View catalogue
WrenchStar Multi-e – Insulated Torque Wrenches
WrenchStar Multi-e – Insulated Torque Wrenches
Insulated digital torque wrenches for electric vehicle and battery assembly applications. They combine torque and angle measurement, inductive charging and communication with Crane data collectors or controllers for production and quality control.
Torque Wrenches
View catalogue
WrenchStar Multi – Digital Torque Wrenches
WrenchStar Multi – Digital Torque Wrenches
Digital torque and angle wrenches for assembly and joint auditing. They feature interchangeable heads, visual alerts and vibration feedback, and connect to Crane data collectors or line controllers to record tightening results.
Torque Wrenches
View catalogue
IQWrench3 – Digital Torque Wrenches
IQWrench3 – Digital Torque Wrenches
Digital torque wrenches combining torque and angle measurement with data collection. They feature a display, visual alerts and vibration feedback, and support interchangeable heads for tightening control and traceable audits.
Torque Wrenches
View catalogue
Static Torque Transducer for Impact Tools
Static Torque Transducer for Impact Tools
Static transducer compatible with impact tools for measuring and verifying torque. Designed for workshop, production and development testing, with the option of using joint simulators to reproduce tightening conditions.
Torque Transducers
View catalogue
Static Torque Transducers
Static Torque Transducers
Static transducers for testing manual, continuous-rotation and impulse tools at test stations. They can be combined with Joint Kits joint simulators and Crane data collectors to verify the applied torque.
Torque Transducers
View catalogue
CheckStar Multi – Torque and Angle Transducers
CheckStar Multi – Torque and Angle Transducers
Rotary transducers for checking tightening tools, with torque measurement, optional angle measurement and a visual result indicator. They connect to Crane data collectors and support wireless communication via the optional RFm module.
Torque Transducers
View catalogue
CheckStar – Rotary Torque Transducers
CheckStar – Rotary Torque Transducers
Rotary transducers for measuring torque between the tool and the joint during tightening. Available with angle measurement for verifying continuous-rotation and impulse tools in production and quality control.
Torque Transducers
View catalogue

Competitive advantages of Crane Electronics solutions

Over 50 years dedicated to torque management

Founded in 1971, Crane Electronics Itsving been developing solutions for over five decades Torque measurement and control, which has made it a global benchmark and “the force in torque management”.

Full tightening cycle coverage

The Crane range extends from Torque wrenches and transducers until torque testers, test benches, data loggers and software. This allows for the entire cycle to be covered: tool audit, process validation, final quality, and maintenance.

Accuracy, repeatability, and data traceability

Crane's digital solutions enable measurement pair and angle, store results, associate them with specific jobs or unions, and export the data to plant systems. This achieves full traceability of critical joints and reduces tightening incidents.

Modular and scalable equipment

Thanks to the combination of rotary and static transducers, test rigs, line controllers and modular software, it's possible to start with a simple key checking solution and grow towards complete in-plant torque management systems.

Local Technical Support from Arsam Supplies

With the support of Arsam, could you define what Keys, transducers, torque testers and Crane Electronics systems you need, how to integrate them into your quality procedures, and how to leverage process data to reduce rejections and rework.

About Crane Electronics

Crane Electronics is the specialist in Torque measurement, control, and management Since 1971. Its solutions are used on assembly lines for automotive, aerospace, rail, construction, machinery and many other industrial sectors.

The company offers a full range of Digital and battery-powered torque wrenches, rotary and static torque transducers, torque testers, joint simulators and test benches, as well as data collectors, line controllers and torque management software.

Crane Electronics' solutions enable audit tightening tools, validate processes, verify assembly quality and document applied torque in each joint, providing complete traceability and helping to comply with customer standards and specifications.

contact a specialist.

If your project requires the best solutions Assembly, trust the expertise of Arsam. Our technical team is certified to advise you on finding the best solution for your needs.

CONTACT

FAQ – Frequently Asked Questions about Crane Electronics

What kind of products does Crane Electronics offer for torque measurement?

Crane Electronics offers a comprehensive range of solutions for the Torque measurement and controldigital and battery-powered torque wrenches, rotary and static torque transducers, torque testers, joint simulators, test benches, data collectors, line controllers and torque management software.

A Crane Electronics torque tester is used to calibrate and verify the accuracy of torque wrenches and other torque-controlled tools.

One Torque tester de Crane Electronics wordt gebruikt voor verify and calibrate torque wrenches, screwdrivers, and other tightening tools. Allows checking if the tool delivers the correct torque before going into production, simulating different types of joints and helping to comply with standards such as ISO 6789.

What advantages do Crane digital torque wrenches offer over a traditional wrench?

The Crane digital torque wrenches allow measuring torque and angle, storing readings in memory, programming jobs and tolerance limits, and download the data to a PC or plant system. This provides traceability of the torque applied at each joint and facilitates quality control compared to a traditional mechanical wrench.

What is the difference between a rotary torque transducer and a static one?

One Rotary torque transducer is used to measure torque in dynamic applications, for example in rotating shafts or in-use tools. Static or stationary transducer is used in applications where the tool reacts against the sensor, such as test benches or torque wrench verification. Crane Electronics offers both technologies to suit each application. Regardless of the type of transducer, it is important to check that its measurement range matches the torque required by the application. You can consult our torque unit calculator when you need to convert values between different measurement systems.

How do IQVu data collectors and Crane software help with torque traceability?

The torque data collectors IQVu allow the creation of jobs and measurement rounds, recording torque and angle data with date and time, and associating each reading with a tool, an operator or a joint. With the Torque management software From Crane, it is possible to analyse torque curves, generate reports and store the results for future use. Full torque traceability.

How does Suministros Arsam help me choose the right Crane Electronics solution?

In Arsam We analyse your assembly processes, the tightening tools you use, and your customers' quality requirements. From there, we propose the combination of Torque wrenches, transducers, torque testers, data collectors and Crane Electronics software that best suits your plant, and we will assist you with the setup and training.

Scroll to Top